|
|
Post by mudhog on Nov 7, 2005 12:55:44 GMT -5
so tell us where you are and what you drive. ill go first.
i am Shannon Smith im out in gresham i have a 77 1ton blazer mild built 350 sm465 np205 2.5in lift 40in iroks dana 60 front 5:13's detroit rear is a 14ff 5:13's with a detroit and a warn 15,000 winch
|
|
poke
New Member
Posts: 2
|
Post by poke on Nov 7, 2005 15:39:05 GMT -5
Josh Poke' Rogers outta Tacoma I wheel with the DogPound....looking for an older Blazer for dedicated wheeling duty but for right now I play (wouldn't call it wheel'n) in my 2001 Silverado HD diesel "Cowboy Caddy" but since it is my only 6 passenger rig at the moment I don't get to break'n parts (knock on wood).......
|
|
|
|
Post by Muddytazz on Nov 7, 2005 20:44:17 GMT -5
My name Jeff "Tazz" Rice, I'm currently living in Canby, Or. I own a 75 3/4 ton Suburban with a built 350, TH350, NP203, 6in lift with 33in Mud Kings. D44 front and a 14FF rear14ff with 4.10's and a 8274 Warn winch.
|
|
|
|
Post by pdx84chvy on Nov 8, 2005 1:19:12 GMT -5
Bill Morrison in Portland driving a 84 K20 with 6" susp., 3" body on 38.5's. Mildly built 350/sm465/208 with currently 10 bolt front and 14sf back with 3.73 gears
|
|
|
|
Post by badbronco on Nov 11, 2005 10:35:29 GMT -5
Bryan Dodge,Mill City,OR.I drive a 78 Bronco with a 460,C6,Np205,3/4 ton running gear and 36" swampers.
|
|
|
|
Post by Muddytazz on Nov 11, 2005 10:38:50 GMT -5
Hey Bryan, welcome aboard man, long time no see around.
|
|
|
|
Post by chevit on Nov 11, 2005 10:42:59 GMT -5
welcome to the club Bryan.
|
|
|
|
Post by badbronco on Nov 11, 2005 10:44:30 GMT -5
Thanks.Ive been around just under this username now.
|
|
|
|
Post by xtremeoneusa on Nov 13, 2005 2:49:23 GMT -5
hi my am chris and i drive a 86 k5 it sits on 35" ta mudders and is saverly under powerd with the factory 305 that over 200.000 miles on it but hope to change that in the up coming mounths to see my rig you mite think its a tar baby but i know what a blazer is bilt for and im not afraid to use it. shannon how i get my truck pichter up or maybe you can put one in you have all the same ones i have
|
|
|
|
Post by cussamn on Nov 13, 2005 11:13:42 GMT -5
Hi my name is Brad and I am in Lewis County, WA. I drive a couple of different trucks. I have a 1968 chevy with 7 inches of lift and 38 inch swampers. It is a 3/4 ton, built 350, 4 speed, with a 205 transfer case.
My other vehicle is a little funner to play in. It is a 1988 Suzuki Samauri with a nissan Z engine. It has about 8 inches of lift and 33 inch mud tires. I have another samauri that I am building right now.
|
|
|
|
Post by poorboy1 on Nov 13, 2005 22:23:14 GMT -5
Name is Jason and I live in Newberg. I wheel a 75 chevy. 350ci/350/203 a built D60 /14ff/disc fully locked. full cage and installing propane now. 38.5 swampers and beadlocks. Very near future mods are a doubler and shackler flip.
|
|
dwaller
New Member
http://sutherlinbbfest.org
Posts: 13
|
Post by dwaller on Nov 16, 2005 10:16:48 GMT -5
Hey, guys,
Duane from Sutherlin here, I have a 79 chevy short wide with a big block, th400/ford np205, 9 inch rear with a spool, hp dana 44 ford front shimmed so tight it wouldnt move, with 5.13 gears running 38.5 boggers. Still under some construction. gotta finish putting the ford coil spring suspension under it...one of these days..
|
|
|
|
Post by rebelbronco on Nov 17, 2005 1:40:53 GMT -5
hello all I am Marvin from milwaukie OR I drive a 78 bronco with 400 c6 4inch lift 35x15 swampers
|
|
|
|
Post by chevit on Nov 17, 2005 9:36:18 GMT -5
hey Marvin welcome to the club... ;D
|
|
|
|
Post by Muddytazz on Nov 17, 2005 10:39:12 GMT -5
Welcome Marvin
|
|
